Take A Step Back Ski Mask Download

Download Commodity

Download Article

A ski mask, or balaclava, is a cloth caput comprehend used to protect the face up and head from harsh weather, cold, or wind. Although it tin be worn a number of ways, it commonly covers the bulk of the head, leaving only the eyes exposed. Balaclavas are bachelor at sports stores, ski outfitters and online. However, you can likewise sew a mask yourself. With a sewing auto, some fleece and a few measurements, you can create a snug, warm ski mask to protect you through the winter.

ane
Use a record measure to measure the length and width of the ski mask wearer'southward caput. Measure the width around the crown of the head (w1). Measure the length from the pinnacle of the wearer'due south head downwardly to the forepart of their neck (h).
- Ski masks come in a number of different lengths. Decide if you lot want it to end at the lesser of the chin or if y'all want information technology to pool at the bottom of the cervix. Measure accordingly.
2

Measure out the altitude betwixt the person's optics (e). Extend the measurement to the outside of the eyebrows. It is essential that the space betwixt the eyes be wide enough so that the wearer can see.

Advertisement
3

Measure from the crown of the head to the top of the eyes (w2). This volition exist important when yous cut the hole for the optics.
4

Add together 1 inch (ii.five cm) to the height and width measurements to let for seams.
5

Write down your measurements. Y'all will demand them afterward on in the process.
vi

Buy ¹⁄_ii yard (0.5 m) of fleece. Although this amount will make more than ane homemade balaclava, it will allow you lot to have some extra cloth in case of mistakes. Choose the thickness of the polar fleece based on the climate; the colder the climate, the thicker the material.
7
Trace a balaclava blueprint on a piece of paper. In gild to practise this, keep in mind the shape of a balaclava and apply the measurements you take recorded. Go to bikewinter.org/balaclava to come across an example of a traced balaclava pattern.
- This design will be traced onto folded fabric, and so the pattern should exist only for the left manus side of the confront. Divide the width measurement and eye measurement in one-half to get an authentic pattern.
- Measure and mark a line on the top of your sheet of newspaper to signal the meridian measurement. Divide the width measurement in half and mark the horizontal width of the balaclava on your design.
- Measure and marker the length between the superlative of the head and the top of the heart sockets on the left hand side of your newspaper. Split up the eye width measurement in half and mark the measurement from the left hand side of your newspaper. You will cut out a space for the eyes using these measurements.
- Trace the pattern according to your marks and the shape in the example pattern. Connect your marks with a domed tiptop for the head, a bend around the back of the skull, an indent for the neck and a space (for the optics) that indents into the left side of the pattern. Brand certain non to indent the area where your rima oris and nose will go so that you have room to exhale.
8

Cutting out your pattern with sharp scissors.

Advertizement

1

Fold the fleece and then that the fold is on the left manus, vertical side. The fabric should stretch horizontally, perpendicular to the fold. Try to fold the fleece so that it is the exact width of your pattern.
ii

Folding the fleece, instead of cutting two sides, eliminates a seam down the front of the face.
3

Identify your design on summit of the folded fleece. Either depict around the pattern with a fabric pen or pivot the pattern directly onto the fleece and cut with fabric scissors. The only part of the left hand fold that you will cut is the infinite for the eyes.
4

Turn the fleece within out and fold again forth the front. Stitch on the within of the textile and so turn information technology inside out.
five
Pin the folded fabric together, the bottom and the optics get-go earlier sewing the back seam together. Create a 3/4 inch folded hem in both areas.
- When you pin the eyes, make a diagonal cut in the corners and fold each side down. Pin it in identify.
six

Ready your sewing car with the blazon of thread you program to use. Set information technology to a small zigzag stitch. This will give the polar fleece more stretch than a straight stitch.
7

Sew the lesser hem with a zigzag stitch. Sew the optics with a zigzag stitch. You may choose to use a thread that is a matching colour, especially around the optics.
8

Pin the ends together at the back. Try for a one/two inch seam allowance. Polar fleece does not fray, then the seams are of import simply to create the grade of the hat.
9

Sew from the bottom of the ski mask at the back of the neck to the crown of the head with a zigzag sew.
x

Plow the homemade balaclava inside out. Endeavor it on to ensure it fits.

Ad

Add New Question

Question

What is the (w2) measurement?

The (w2) is at Step 3, the crown of the head at the top of the eyes; (w1) is the crown and represents the acme of the eye opening, and (w2) is the lesser of the middle opening.
Question

Is it against the law to wear a ski mask in public?

Information technology depends on where you alive, but in general it's legal. Some people might think information technology's weird, and where I live you can't wear them (or any other item that covers your face) in banks and such. So check your local laws and consider the context/setting when you're wearing one.